NameOTV-IP2RF 32 in 1 IP TO Analog RF Modulator
Brand Name:Dibview
Model Number:OTV-IP2RF
Product name:OTV-IP2RF 32 in 1 IP TO Analog RF Modulator
Input:4 GE Rj45
MPEG Transport Format:SPTS, MPTS
Up to 32 channels in NTSC or PAL:YES
Video Format:MPEG1/2/4, H.264, H.265, AVS, AVS+, VC1
32 agile channels:Yes, support
Support:teletext and overlay functions (as per order optional)
Application:DTV Headend Systems

Product Description


OTV-IP2RF 32 in 1 IP TO Analog RF Modulator can ingest multiple HD or SD IP streams in either MPEG-2 or MPEG-4 or H.265 format and convert them to PAL/NTSC modulated RF analog outputs for delivery to legacy analog TV networks. It can decode MPEG-2 and H.264 H.265 encoded video streams in SD and HD quality. In case of HD decoding, automatic downscaling to SD resolution is performed. Numerous audio formats and modes can be decoded and modulated on TV channels.


OTV-IP2RF 32 in 1 IP TO Analog RF Modulator adopts 2U chassis design, which is a cost-effective device specially developed used for commercial places to solve TV signal sources. The front panel has web management port, and the rear panel has four Gigabit input ports and one RF output port, which supports Max.32 analog modulated carrier output of processing agile channels.


OTV-IP2RF 32 in 1 IP TO Analog RF Modulator ensures a high agility inside the whole RF output frequency range. This enables full flexibility and makes the most efficient use of the available channel spectrum. This allows operators to support legacy analog layers of service while simplifying front-end equipment and power consumption and integrating with modern IP video front-end architectures, with the characteristics of high performance, low cost, and memory function. It is very suitable for the usage of analog TV front-end systems in various business places (such as: hotels, guesthouses, clubs, tea houses, etc.)

Key Features:

  • Support 4 GE adaptive IP input over MPTS and SPTS, UDP/RTP protocol

  • IP input supports Unicast and multicast protocols, UDP, IGMP V2/V3

  • Up to 32 IP streams and output up to 32 channels in NTSC or PAL standard

  • 1 RF output (with -20dB test port) can support up to 32 agile channels (the output level of each channel can be adjusted independently)

  • Users can customize different modulation formats (support DK, DI, BG, NTSC)

  • According to user needs, teletext and overlay functions (Optional as per order)

  • Providing BISS decryption function according to user needs (Optional as per order)

  • Easy configuration and software upgrade by built-in Web UI

Technical Specifications:




Input Connector: 4*RJ45

Transport Protocol: UDP,RTP, IGMP V2/V3, Unicast,   Multicast

MPEG Transport Format: SPTS, MPTS


Video Resolutions: Up to 1080P

Video Format: MPEG1/2/4, H.264, H.265, AVS, AVS+, VC1

Audio Format: MPEG-1 Layer I/II/III, WMA,AAC,AC3

MAX decoding stream: 32 channels

Additional capabilities: Teletext; BISS decrypt

Aspect Ratio Control: 4:3,16:9


Connector: F female connector

Number of RF channels: 8, 16, 24, Max 32, fully agile modulated channels


Output Level: ≥ 45dBmV combined

Adjust Range: 20dB Per 32 Channels, 10dB Per Channel

Output Frequency: 48~860 MHz

Video-signal to noise ratio: ≥ 60dB

Audio Adjust Range: 0~100 %


Network management (WEB)

Ethernet software upgrade


Voltage: 100 to 120/200 to 240V AC ±10%; 50/60Hz

Consumption: ≤240W, Weight: 8.5KGS

Operating temperature: 0~45℃

Storage temperature: -40~70℃

Relative humidity: 10%~90%(non-condensing)

Dimensions: 484mm(W)×435(D)mm×89mm(H)( 2RU)


Web Management Page:

WEB Management Page.jpg

Hits: 【Print】